Eight 2.5-Inch Hot-Swap Drive Cable Routing - Lenovo ThinkSystem SR250 V2 Maintenance Manual

Four SATA/SAS drives (Hardware RAID/HBA)
From
Backplane: Power connector
1
Backplane: SATA signal connector
2
Figure 38. Four SATA/SAS drives (Hardware RAID/HBA)

Eight 2.5-inch hot-swap drive cable routing

Use this section to understand how to route cables for eight 2.5-inch hot-swap drive model.
Notes:
• Connections between connectors;
• When routing the cables, ensure that all cables are routed appropriately through the cable guides and
cable clips.
ThinkSystem SR250 V2 Maintenance Manual
46
To
System board: Backplane power connector
8i: C0
↔ ↔ ↔
, , , ...
1 1 2 2 3 3 n
↔
n