Tunstall MXD User Manual page 15

Removing and
Returning Your System
If services need to be discontinued, please inform your
service provider or Customer Care (1- 877- 266- 0733). Advise
them of the reason for discontinuation of service and request
removal and return instructions.
Note: The MXD automatically turns on when it is connected to AC
power. When the MXD is removed from service and/or relocated, it is
very important to turn it off to preserve the battery and to keep the unit
from initiating any inadvertent alarms while in transit.
1. Unplug the MXD from the AC outlet.
2. After the Status light begins to flash, press the T/L button on the
back of the MXD three times (Figure 6).
3. The base unit will speak "Hold HELP to turn off." Press and hold the
large HELP button on top of the base unit until the Status light
stops blinking.
4. Remove the phone line from the telephone jack on the wall. If a
phone is connected to the base console, unplug it and connect it to
the telephone jack on the wall.
Turning off the MXD
Figure 6: Test/Learn
(T/L) Button
15