Sound Menu - Tesla 32M320BH Quick Start Manual

ENG
Color Temp
Change the overall color cast of the picture.
Press / button to select Col or Temperature , then
press OK button to enter sub-menu.
Press / button to select. (Available Picture mode:
Cold I, Normal, Warm).
You can change the value of red, green and blue when
color temperature is in User mode.
Cold: Increase the blue tone for the white.
Normal: Set to default col or temperature.
Warm: Increase the red col or for the white.
Noise Reduction
Filter out and reduces the image noise to improve
picture quality.
Press / button to select Noise Reduction, then press
OK button to enter sub-menu.
Off: Select to turn off video noise detection.
Low: Detect and reduce low video noise.
Middle: Detect and reduce moderate video noise.
High: Detect and reduce enhanced video noise.
Default: Set as Default.

Sound Menu

Press MENU button to display the main menu.
Press / button to select SOUND in the main menu.
1. Press / button to select the option that you want
to adjust in the SOUND menu.
2. Press Enter button to adjust.
3. After finishing your adjustment, Press Enter button to
save and return to the previous menu.
Sound Mode
Press / button to select Sound Mode, then press
Enter button to enter sub-menu.
Press / button to select.
You can change the value of Treble and Bass when the
sound is in Personal mode.
TIPS: You can press SMODE button on the remote
control to change the Sound Mode directly.
Standard: Produces a balanced sound in all
environments.
Music: Preserves the original sound.Good for musical
programs.
Movie: Enhances treble and bass for a rich sound
experience.
Sports: Enhances vocals for sports.
Personal: Select to customize sound settings.
Note:The treble and bass are only available in Personal
mode, you can adjust them as you like.
Balance
Press / button to select option, Press / button
to adjust.
Auto Volume level
Press / button to select Auto Volume Level, then
press / button to select On or Off.
SPDIF Mode
Press / button to select SPDIF Mode, then
press/ button to select Off/ PCM/ Auto.
AD Switch
Press / button to select AD Switch, then press /
button to select On or Off.
Amblyopia function for the blind, the tracks will be
mixed describe the current screen.
It needs codestream to support.
NOTE:
Balance: This item can adjust the speaker's output, it
enables you to listen to best at your position.
Auto Volume: This item is used for reducing the
difference between channel and program's volume
automatically.
8