Menu Settings - Tesla 32T300SH User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENG
DVB-C installation
Cable Setting
Press  to highlight your settings.
Scan type
NOTE: Full scan will have a duration of approximately 20 minutes, depending on your cable network.
Frequency
Network ID
Symbol
NOTE: Please check the settings for your cable system used by your provider!
Press OK to continue and to start search process.
Crypted
Press  to highlight the country that you want to install, then press OK to start searching.

MENU SETTINGS

Menu control (DTV mode)
Press MENU to enter the main menu. Press  to select an item. Press  and OK to select the
submenus. Press MENU to exit the item.
Picture menu
Picture Mode
Colour Temp
Noise Reduction
In the Personal mode, settings can be changed for Brightness, Contrast, Colour, Tint and Sharpness.
Sound menu
Sound Mode
Treble
Bass
Balance
Auto Volume Level
SPDIF Mode
AD Switch
*Availability depending on broadcaster
You can select Network Scan or Full. (Default Network Scan for quick search advised)
Please enter (with 0 ~ 9) the main frequency used by your provider in KHz.
Please enter (with 0 ~ 9) the used Network ID from your provider.
Please enter (with 0 ~ 9) the used Symbol from your provider. (Ks/s)
Select FTA Channels to search Free-To-Air channels only or All Channels to
search FTA and encrypted channels
Select the automatic picture control mode. Available choices are Dynamic,
Standard, Mild and Personal.
Select the overall colour tone of the picture. Available choices are Cold,
Normal and Warm.
Eliminates noise in the picture. Available choices are:Off, Low, Middle, High and
Default
Select your favourite sound mode for each input. Choices are Standard, Music,
Movie, Sports and Personal.
Adjusts the higher frequency of the sound.
Adjusts the lower frequency of the sound.
Control the sound balance between the right and left loudspeaker (earphone).
Adjust the volume corresponding to the input audio level. Options are On
and Off.
When SPDIF output is connected to digital home audio system you can
select Auto to output Dolby audio* automatically. When you choose PCM,
stereo audio is selected only and with Off you can switch off this output.
Turn on the Audio description, you can activate the setting of AD volume.
When turn on the audio description, a narrator will describe what is
happening on the screen for blind or visually impaired viewers. (Only if
available in DTV mode.)
8

Advertisement

Table of Contents
loading

Table of Contents