Related Manuals for Feider Machines FBM1300
Summary of Contents for Feider Machines FBM1300
- Page 1 ORIGINAL INSTRUCTIONS POLISHER FBM1300 Instruction manual Warning: Please read the manual carefully before using the unit! BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux - France MADE IN PRC...
-
Page 2: Safety Instructions
1. SAFETY INSTRUCTIONS General power tool safety warnings WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 3 e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
- Page 4 Residual risks Even if you use this product in accordance with all safety requirements, the risk of injury and damage remains: Adverse health effects resulting from vibration if the product is used for long periods or if it is not handled properly and properly maintained Risk of injury to persons and property caused by projectiles.
-
Page 5: Your Product
2. YOUR PRODUCT a. Description 1- Auxiliary handle 2- Protection housing 3- Polishing wheel 4-Carbon brush cover 5- ON/OFF switch 6-Power cable 7- Speed adjuster b. Technical data Voltage 230-240V~, 50Hz Rated power 1300W No load speed 1000-3000/min Grinding disc diameter Ø120mm Output shaft Weight... - Page 6 Information: The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another; The declared vibration total value may also be used in a preliminary assessment of exposure. Warning: that the vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used;...
-
Page 7: Operation
c) Mounting/replacing the polishing wheel the Polishing wheel was mounted before delivery, to change the wheel, just loose the thread Loose 4. OPERATION a. Starting and stopping the tool Push forward and hold the ON/OFF switch to start the tool. Release the switch to stop the tool. - Page 8 b. Servicing No specific maintenance is required by the user. After each season, please bring the tool to an authorized service center for general machine maintenance. c. Spare parts You can order spare parts directly from our service center. Please place your order according to the type of machine and the part number indicated in the explosion drawing.
- Page 9 Tel: +33 (0) 5.34.508.508 Fax: +33 (0) 5.34.508.509 Declares that the machine indicated below: Polisher FBM1300 Serial number: 20210503911-20210505410 Complies with the provisions of the Directive "machinery" 2006/42/EC and national laws transposing it; Also complies with the following European directives:...
-
Page 10: Warranty
8. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 11: Product Failure
9. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 12: Warranty Exclusions
10. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...