♦ If you are using TCP/IP (recommended for Windows Networks) and
are not connected to a DHCP server (for obtaining an IP address
automatically), you need a unique IP address for the wireless print
server (for example: 192.0.0.192) and a subnet mask. If the print
server is not on the same IP subnet as the computers you are printing
from, you need a router. A print server with an IP address of
192.0.0.192 will not be seen by a network looking for devices with a
prefix of 10.1.xxx.xxx. A router (default gateway) address is optional.
♦ Wireless security settings.
S u p p o r t e d O p e r a t i n g S y s t e m s
The print server supports multiple network protocols for users with
Microsoft Windows, Novell NetWare, NDS, and UNIX.
S u p p o r t e d N e t w o r k P r o t o c o l s
♦
TCP/IP:
LPD/LPR
BOOTP
DHCP
HP JetDirect
Raw TCP/IP (port 9100 or any chosen port)
NetWare (NEST)
NetBIOS over IP (with SMB)
NetBEUI
DLC
♦
Telnet
♦
RSH or REMSH (remote shell)
♦
WINS
♦
DHCP
♦
FTP
♦
SNMP
All protocols are simultaneously active.
Getting Started 1-3