Wireless Mode - Paxar 9860 Operating Instructions Manual

Wireless Mode

The wireless mode sets how you communicate with your wireless
network.
In Ad-Hoc mode, you do not need an access point. Ad-Hoc mode is
also called peer-to-peer (point-to-point) communications, so as long
as the devices are in range, they will connect and communicate with
each other.
Infrastructure mode requires an access point to communicate.
Note: If communicating in a mixed environment where both Ad-Hoc
and infrastructure mode are used, make sure the SSIDs are
unique in both modes.
From the Main Menu: Select Setup, Network, Wireless. Then follow
these steps.
1. Press or
WIRELESS
Wireless Mode
2. Press Enter/Pause. The current setting is displayed, for example:
WiFi Mode
Ad Hoc
3. Press or
you need, press Enter/Pause.
4. Press Escape/Clear until you see the Main Menu.
2-10 MonarchNet2 Operating Instructions
until you see
to change the setting. After you display the option