Console Commands - Paxar 9860 Operating Instructions Manual

C O N S O L E C O M M A N D S
Use this chapter to configure the Print Server using Telnet. You
must have a basic understanding of the Telnet application. For initial
setup, do not use Telnet, use auto-discover mode. Once you have
the IP address, you can use Telnet or a Web browser.
RSH or REMSH (remote shell) support is available with the release of
version 3.0 or greater printer firmware. Remote shell support is a
common UNIX application that provides remote command execution
capability for networked devices. For more information, refer to your
UNIX documentation.
♦ You can use Telnet if you do not have access to the MonarchNet2
software.
♦ This chapter also includes information about the Network Packet
(Console Passthru).
Note: The default port is Port 23.

Console Commands 4-1

4