Ip Address - Paxar 9860 Operating Instructions Manual

I P A d d r e s s
The IP (Internet Protocol) Address is a unique identifier for a device
on a network. It consists of four 3-digit numeric fields, separated by
periods.
To change the setting, from the Main Menu: Select Setup, Network.
Then follow these steps.
1. Press or
NETWORK

IP Address

Press Enter/Pause. The current setting is displayed, for example:
2.
IP Address
192.0.192.0
Press or
3.
scroll one digit at a time from 0-9. After you display the option
you need, press Enter/Pause.
For example, to change the IP address from 192 to 000, press
or to highlight the first position and press Feed/Cut until
you see 0, then press
Feed/Cut until you see 0, then press
position and press Feed/Cut until you see 0. Press
Enter/Pause to save the setting or press Escape/Clear to exit
without saving.
If you enter a series of digits greater than 255 for any
segment of the IP address and press Enter/Pause, the printer
does not save the setting. However, no error appears on the
display. Correct the IP address and then press Enter/Pause
to save the setting.
4. Press Escape/Clear until you see the Main Menu.
until you see
to move through the positions. Press Feed/Cut to
to select the next position and press
to select the next
Configuring the 802.11b/g and IP Settings 2-3