A-Point Density - Paxar 9860 Operating Instructions Manual

A-Point Density

The A-Point density is the access point's density. If the
communication quality (transmit rate) between devices on a network
drops below a certain level, the devices scan for another access point
in the area offering better transmit rates, etc. The range is Low,
Medium, or High.
If set to High density, the device searches for another access point in
range using 11 Mbps communications; Medium uses 2 to 5.5 Mbps
communications; Low uses 1 to 2 Mbps communications.
From the Main Menu: Select Setup, Network, Wireless. Then follow
these steps.
1. Press or
WIRELESS
APoint Density
2. Press Enter/Pause. The current setting is displayed, for example:
APOINT DENSITY
Low
3. Press or
you need, press Enter/Pause.
4. Press Escape/Clear until you see the Main Menu.
until you see
to change the setting. After you display the option
Configuring the 802.11b/g and IP Settings 2-11