Table of Contents
Advertisement
To change the setting, from the Main Menu: Select Setup, Network.
Then follow these steps.
1.
Press
or
NETWORK
Boot Method
2.
Press Enter/Pause. The current setting is displayed, for example:
BOOT METHOD
BOOTP
3.
After you display the option you need, press Enter/Pause.
4.
Press Escape/Clear until you see the Main Menu.
W i r e l e s s
Using the Wireless Menu, you can view the signal strength, set the
Service Set Identifier (SSID), wireless mode, A-Point density, transmit
rate, and channel.
Note:
All nodes of a wireless network need to have the same
settings to communicate with each other. We recommend
reviewing the terms in the glossary before you begin.
Signal
SSID
Strength
until you see
Wireless
Mode
Network
Wireless
Transmit
APoint
Rate
Density
Configuring the 802.11b/g and IP Settings 2-7
Channel
Advertisement
Table of Contents
Troubleshooting
