Changing Snmp Settings - Paxar 9860 Operating Instructions Manual

20. Select Enable Web Authorization Timeout to make the Web
pages time out after five (5) minutes of inactivity.
Note: The time out period is set for five minutes and cannot be
changed.
21. Select Enable HP Jet Admin if using HP Jet Admin. No other
settings are required for HP JetAdmin.
22. Click Save Changes to save changes or click Save/Re-init
Network to save the changes and re-initialize the network with
the new settings. Any changes made on this screen or other
screens do not take effect until you click Save/Re-init Network.
This process takes a few minutes.

Changing SNMP Settings

Only configure the settings required for your network/printer.
1. Click the SNMP tab to change SNMP settings.
2. Enter the System Name, if it does not automatically appear.
3. Enter the System Contact.
3-12 MonarchNet2 Operating Instructions