Subnet Mask - Paxar 9860 Operating Instructions Manual

S u b n e t M a s k
IP networks are divided using subnet masks. The subnet mask
address determines where the IP address belongs in the network. It
consists of four 3-digit numeric fields.
To change the setting, from the Main Menu: Select Setup, Network.
Then follow these steps.
1. Press or
NETWORK

Subnet Mask

2. Press Enter/Pause. The current setting is displayed, for example:
Subnet Mask
255.255.000.000
3. Press or
scroll one digit at a time from 0-9. After you display the option
you need, press Enter/Pause.
For example, to change the subnet mask from 192 to 000,
press or
Feed/Cut until you see 0, then press
position and press Feed/Cut until you see 0, then press
select the next position and press Feed/Cut until you see 0.
Press Enter/Pause to save the setting or press Escape/Clear
to exit without saving.
If you enter a series of digits greater than 255 for any
segment of the subnet mask and press Enter/Pause, the
printer does not save the setting and no error appears on the
display. Correct the subnet mask and then press Enter/Pause
to save the setting.
4. Press Escape/Clear until you see the Main Menu.
2-4 MonarchNet2 Operating Instructions
until you see
to move through the positions. Press Feed/Cut to
to highlight the first position and press
to select the next
to