Ip Gateway - Paxar 9860 Operating Instructions Manual

I P G a t e w a y
The IP Gateway (or router) allows connections (communications)
between different subnets on a network. It consists of four 3-digit
numeric fields.
To change the setting, from the Main Menu: Select Setup, Network.
Then follow these steps.
1. Press or
NETWORK

IP Gateway

2. Press Enter/Pause. The current setting is displayed, for example:
Gateway Address
010.192.000.000
Press or
3.
scroll one digit at a time from 0-9. After you display the option
you need, press Enter/Pause.
For example, to change the Gateway Address from 192 to
000, press
Feed/Cut until you see 0, then press
position and press Feed/Cut until you see 0, then press
select the next position and press Feed/Cut until you see 0.
Press Enter/Pause to save the setting or press Escape/Clear
to exit without saving.
If you enter a series of digits greater than 255 for any
segment of the Gateway Address and press Enter/Pause, the
printer does not save the setting and no error appears on the
display. Correct the Gateway Address and then press
Enter/Pause to save the setting.
4. Press Escape/Clear until you see the Main Menu.
until you see
to move through the positions. Press Feed/Cut to
or to highlight the first position and press
to select the next
Configuring the 802.11b/g and IP Settings 2-5
to