Table of Contents
Advertisement
1
G E T T I N G S T A R T E D
Your Monarch 9855 or 9860 Version 5.0 or greater printer
contains MonarchNet2 software, which allows you to access, configure,
and control your printers with the Monarch 7411 Ethernet Print Server
remotely across a LAN (local area network), WLAN (wireless local area
network), or WWW (world-wide web) connection.
Information in this document supercedes information in previous
versions. Check our Web site (www.paxar.com) for the latest release
and documentation information.
O v e r v i e w
The Monarch 7411 Print Server lets you communicate with Monarch
printers on an 802.11b and 802.11g wireless network or wired Ethernet
802.3 network. 802.11b/g refers to 802.11b and 802.11g in this manual.
You can use the print server in Ad-Hoc (peer-to-peer) or infrastructure
(access point) wireless mode. The print server operates at speeds of up
to 54 Mbps on any IEEE 802.11b/g wireless compatible network. It
includes a dual-mode built-in wired Ethernet (802.3) connection. So, the
print server automatically switches between wireless and wired Ethernet
mode.
Refer to your network manuals for more information. This manual does
not include information about setting up your wireless or wired network.
We recommend reviewing the terms in the glossary before you
begin.
A u d i e n c e
This manual is written for the System Administrator who sets up printers
on the network and is familiar with basic networking principles.
Getting Started 1-1
Advertisement
Table of Contents
Troubleshooting
