Wj-Hd100 Setup Menu - Panasonic WJ-HD100 Operating Instructions Manual

WJ-HD100 SETUP MENU

Clock Setup
001 CLOCK>
Set the internal timer to the present time and date.
The default value is "JAN 1.00 0:00".
1. Hold down the [SETUP/ESC] button for 2 seconds to
display the setup menu on the monitor.
2. Move the cursor on the monitor to CLOCK with the [ ]
or [ ] button. The selected item appears also on the
LCD with item number (001 in this case), and parame-
ters (JAN 1.00 0:00, month-day-year and time) in the
second line.
WJ-HD100 SETUP MENU
CLOCK
TIME&DATE
TIME&DATE DISP.ON
TIME&DATE POSI.R-LOWER
STATUS DISP.
STATUS POSI.
HDD FULL
3. Move the cursor to the right by pressing the JogDial.
The cursor highlights the item position (month digits).
4. Select the appropriate parameter (month) by rotating
the JogDial.
5. Repeat the above steps 3 and 4 to set day, year and
time.
6. Press the [SETUP/ESC] button.
7. Hold down the [SETUP/ESC] button for 2 seconds to
quit the setup.
Note: Beside the JogDial the [ ] and [ ] buttons are also
used to move the cursor for setting time and date.
19
1, 6, 7 3, 4
SETUP/ESC
PUSH– PAUSE
DISPLAY SELECT /
STOP PLAY REC
PLAY MODE SELECT
ALARM SEARCH STEP REW/FF
LCD CONTRAST
/ /
Digital Disk Recorder WJ-HD
2
JAN 1.00 0:00
TYPE1 24H
ON
R-LOWER
1%
DISPLAY SELECT
LCD CONTRAST
CLOCK
TIME&DATE
TIME&DATE DISP.ON
TIME&DATE POSI.R-LOWER
STATUS DISP.
STATUS POSI.
HDD FULL
Time & Date Type
002 TIME&DATE TYPE
Select the 24-hour or AM-PM time system. When AM-PM is
selected, the time is followed by A or P, for example, 7:00
A.
SET
You can also select display style TYPE1 or TYPE2 as shown
/
below.
CLOCK
TIME&DATE
TIME&DATE DISP.ON
TIME&DATE POSI.R-LOWER
STATUS DISP.
STATUS POSI.
HDD FULL
1. Move the cursor to TIME&DATE with the [ ] or [ ] but-
ton.
2. Select the parameter with the JogDial. The default value
is TYPE1 24H.
TYPE1 24H: Time & date are displayed in one line in
the 24-hour system.
TYPE1 12H: Time & date are displayed in one line in
the AM-PM system.
TYPE2 24H: Time & date are displayed in two lines in
the 24-hour system.
TYPE2 12H: Time & date are displayed in two lines in
the AM-PM system.
WJ-HD100 SETUP MENU
JAN 1.00 0:00
TYPE1 24H
ON
R-LOWER
99%
JAN 1.00 7:07:00
TYPE1
JAN 1.00
7:07:00
TYPE2
WJ-HD100 SETUP MENU
JAN 1.00 7:07
TYPE1 24H
ON
R-LOWER
99%
DISPLAY SELECT
LCD CONTRAST
DISPLAY SELECT
LCD CONTRAST