Specifications - Panasonic WJ-HD100 Operating Instructions Manual

SPECIFICATIONS

General
Required Power:
Power Consumption:
Operating Temperature:
Dimensions:
Weight:
Input
Video Input:
Audio Input:
Alarm Input:
Alarm Reset Input:
Time Adjust Input:
Series Recording Input:
Alarm Recall Input:
Remote Control Input:
Output
Monitor Output:
Video Output:
Audio Output:
Camera Switching Output:
Alarm Output:
Alarm Recover Output:
Recording Status Output:
Playback Status Output:
Time Adjust Output:
Disk End Status Output:
Auto OFF Output:
Series Recording Output:
Serial Interface
RS-232C:
RS-485:
Alarm Function
Alarm Buzzer:
Alarm Reset:
Alarm Suspension:
Button Lock Buzzer:
Standard Accessories
Rack Mounting Bracket:
Fixing Screw (M3x10):
Dimensions and weight are approximate.
Specifications are subject to change without notice.
43
120 V AC 60 Hz
24 W
+5 °C to +45 °C (41 °F to 113 °F)
420 mm (W) x 44 mm (H) x 350 mm (D), excluding rubber feet
16-9/16" x 1-3/4" x 13-13/16"
5.2 kg (2.4 lbs)
Composite video or data multiplexed, 1 V[p-p], 75
–10 dBV, 10 k , unbalanced, RCA pinjack
Non-voltage make contact, 100 ms or longer, terminal
Non-voltage make contact, 100 ms or longer, terminal
Non-voltage make contact, 100 ms or longer, terminal
Non-voltage make contact, 100 ms or longer, terminal
Non-voltage make contact, 100 ms or longer, terminal
REC, PLAY, STOP (SETUP), REW/FF, STEP, ALARM SEARCH, JOG-RIGHT,
JOG-LEFT, JOG-CLICK (EXT REC): Non-voltage make contact, 100 ms or longer,
terminal
Composite video, 1 V[p-p], 75 , BNC
Looped through, BNC
–10 dBV, 600 , unbalanced, RCA pinjack
Open-collector, MAX 12 V DC 100 mA, RCA pinjack
Low-active (open-collector, MAX 24 V DC 100 mA)/High-active (12 V DC, 220 )
switchable, terminal
Low-active (open-collector, MAX 24 V DC 100 mA)/hi-active (5 V DC, 220 )
switchable, terminal
Open-collector, MAX 24 V DC 100 mA, terminal
Open-collector, MAX 24 V DC 100 mA, terminal
Open-collector, MAX 24 V DC 100 mA, terminal
Open-collector, MAX 24 V DC 100 mA, terminal
Open-collector, MAX 24 V DC 100 mA, terminal
Open-collector, MAX 24 V DC 100 mA, terminal
9-pin D-Sub
PS Data protocol, Modular-6
•
ON/OFF
Auto reset/manual reset
ON/OFF
ON/OFF
2 pcs
6 pcs
auto-termination, BNC