Panasonic WJ-HD100 Operating Instructions Manual page 56

Digital disk recorder
Hide thumbs Also See for WJ-HD100:
Table of Contents

Advertisement

Communication Protocol, Data Copy Command on page 49 has been updated in time and date
assignment for the start and end points of copying.
Item
Data Copy
Note: Time and date specific copy is now available with the start and end time assignment
(yyyymmddhhnnss:yyyymmddhhnnss) when n=00 is selected.
Communication Protocol, Operating Status Inquiry on page 50 has been corrected.
Item
Transmission Command (ASCII)
Operating Status
QOP
Inquiry
Additions
32 Status Out Terminal on page 8:
The following description is added to AUTO OFF OUT.
AUTO OFF OUT signal also turns active when an HDD error is detected.
WJ-HD100 SETUP MENU on page 16, 17 and 19:
HDD CHECK is added on the bottom line of the window.
Checking is normally performed when the recorder is switched on,
and when it stops playback or recording (alarm recording includ-
ed). Additional checking is also carried out once a day at the time
specified by the setup. An error message appears on the monitor
or LCD if the check finds that the HDD is near to its life end.
From 0:00 through 23:00: at the specified hour, an additional
check is performed.
OFF: Only normal check is enabled.
Note: Playback or recording will be intermittent for 0.5 ms when
the specified time comes for additional checking. Playback or
recording will resume after checking.
2
Transmission Command (ASCII)
ZDP:nn:(yyyymmddhhnnss
:yyyymmddhhnnss)
(addition)
Response (ASCII)
ZDP
Response (ASCII)
xxx (Operating command)
WJ-HD100 SETUP MENU
CLOCK
TIME&DATE
TIME&DATE DISP.ON
TIME&DATE POSI.R-LOWER
STATUS DISP.
STATUS POSI.
HDD FULL
HDD CHECK
Parameter (ASCII)
nn=00 Copy until the card is full
nn=01 Copy 1 field
nn=08 Copy 8 fields
nn=16 Copy 16 fields
nn=32 Copy 32 fields
nn=48 Copy 48 fields
Parameter (ASCII)
xxx=OPL Play
xxx=OPP Pause or Copy to card(addition)
xxx=OPA Pause or Copy to card(deletion)
xxx=OSR Rewind
xxx=OSF Fast Forward
xxx=SCP Search and Play
xxx=SCS Search and Pause
xxx=ORC Normal or Alarm REC
xxx=LIT
Internal timer recording
xxx=OSP Stop
JAN 1.00
0:00
TYPE1 24H
ON
R-LOWER
1%
12:00

Advertisement

Table of Contents
loading

Table of Contents