Panasonic WJ-HD100 Operating Instructions Manual page 22

Password Setup
102 PASSWORD LOCK
A 5-digit password is entered to protect all settings, record-
ed pictures, and operating status, or settings only from
unauthorized access. While the LOCK indicator on the front
panel is on, the LCD displays the message "Now Key
Locked!" to warn unauthorized operators. If accessed in
this condition, the buzzer beeps.
TIMER HDD
ALARM
FULL
SUSPEND
OPERATE
DAYLIGHT
SAVINGS LOCK
Turned on while the buttons are locked.
SYSTEM SETUP
FWD/REW MODE
PASSWORD LOCK
ALL
OPERATION
KEYLOCK BUZZER OFF
RESET PULSE
TIME ADJUSTING SLAVE
SET TIME
AUTO ERASING
1. Move the cursor to PASSWORD LOCK with the up [ ]
or down [ ] button.
2. Select either ON or OFF with the JogDial.
The default is OFF.
ON: Buttons are password protected against erroneous
operation and tampering.
recorder enters the button lock mode if neither a
button nor the JogDial is operated within a period of
five minutes.
OFF: No password protection is applied unless the but-
ton lock mode is enabled using the LCD button as
described in the right column of this page.
22
MEMORY CARD
DISPLAY SELECT
LCD CONTRAST
SKIP&PLAY
OFF
*****
*****
HIGH
9:00
OFF
DISPLAY SELECT
LCD CONTRAST
DISPLAY SELECT
LCD CONTRAST
When set to ON, the
Note: Select OFF when you do not need the button lock
mode. When set to ON, the recorder enters the but-
ton lock mode if neither a button nor the JogDial is
operated within a period of five minutes.
3. Move the cursor to ALL or OPERATION with the up [ ]
or down [ ] button.
ALL: Both normal operations and setup operations are
allowed.
OPERATION: Normal operations only are allowed.
DISP
4. Press the JogDial.
LCD
The preset password appears. The default is "12345"
for both ALL and OPERATION.
5. Select a number with the JogDial, then press it.
The cursor moves one digit to the right.
6. Repeat step 5 above until all digits are entered.
7. Press the [SETUP/ESC] button to confirm the entered
password. Go back to step 3 if you have not yet set the
OPERATION password.
Setting Buzzer ON/OFF
105 KEYLOCK BUZ
FWD/REW MODE
PASSWORD LOCK
ALL
OPERATION
KEYLOCK BUZZER
RESET PULSE
TIME ADJUSTING SLAVE
SET TIME
AUTO ERASING
1. Move the cursor to KEYLOCK BUZZER with the up [ ]
or down [ ] button.
2. Rotate the JogDial to select ON or OFF. The default is
OFF.
ON: Buzzer beeps when unauthorized access takes
place.
OFF: Buzzer does not sound.
SYSTEM SETUP
SKIP&PLAY
OFF
*****
*****
OFF
HIGH
9:00
OFF
DISPLAY SELECT
LCD CONTRAST