Voxelab Aries User Manual page 4

7. Double check the foam, it should contain:
filament, material rack, nozzle, remove
tool, needle, wrenches and screwdrivers.
9. Cut four white cable ties that used to hold
the rods in place.
11. Congratulations! You've unpacked your
printer. Please keep the kit and packing
for future use.
8. Cut the three black cable ties: one for
fixing X-axis synchronous belt, two for
fixing Y-axis synchronous belts on both
sides.
10. Discard the blue protective tapes all
around.
03