Voxelab Aries User Manual page 12

3.
When the extruder move to the second point, pull the A4 paper to feel the friction resistance. If the
friction is too big to move, rotate nut anticlockwise to increase the distance of nozzle and build
plate; if the friction is too small, rotate nut clockwise to reduce the distance of nozzle and build
plate. It is better that pulling the paper and feel the significant frictional resistance until the slight
scratches appear without damage. Tap [Next] to do the third level point.
4. The third leveling point repeats the second point leveling operation until the three-point leveling is
completed.
11