Table of Contents
Advertisement
Viewfinder screen status displays
Display modes and setting
change messages
The display of messages advising the user of what
changes have been made to the settings and what the
adjustment results are can be turned off for some or
all of the items displayed.
Setting change/adjustment result messages and display modes
Situation in which message is displayed
When the filter selection has been changed
When the gain setting has been changed
When the WHITE BAL switch setting has been
changed
When the OUTPUT/AUTO KNEE switch has
been set to AUTO KNEE or OFF
<Note>
This display is shown for about 3 seconds
immediately after the unit's power has been
switched on.
When the shutter speed/mode setting has been
changed
When the white balance (AWB) has been
adjusted
When the black balance (ABB) has been
adjusted
48
(continued)
Message
Filter: n (n=1, 2, 3, 4), m (m=A, B, C, D)
GAIN: n dB
(n= –6, –3, 0, 3, 6, 9, 12, 18, 24, 30)
WHITE: n (n=ACH, BCH, PRESET)
AUTO KNEE: ON (or OFF)
SS: 1/100 (or 1/120, 1/250, 1/500, 1/1000, 1/2000,
S.SCAN, 3.0d to 350.0d, 0.8% to 97.2%)
Example) AWB: OK
For details, refer to "Adjusting the white balance"
(pages 53 to 55).
Example) ABB: OK
For details, refer to "Adjusting the black balance"
(page 56).
Display mode
setting
1
2
3
t
t
±
t
t
±
t
t
±
t
±
±
t
±
±
t
±
±
t
±
±
± : Message is to be displayed.
t : Message is not to be
displayed.
Advertisement
Table of Contents
