Setting The Lamp Displays - Panasonic HDC27H Operating Instructions Manual

Viewfinder lamp displays
Setting the
Select the items targeted for the
the "!LED" screen of the FILM (CAM) MAIN MENU 2
screen.
1
Perform the menu operations (pages 86 to 88) to
open the "!LED" screen.
n < ! L E D >
G A I N ( 0 d B )
G A I N ( – 3 d B )
S H U T T E R
W H I T E P R E S E T
E X T E N D E R
F I L T E R
B L A C K S T R
D A Y L I G H T
M A T R I X
C O L O R C O R R E C T I O N : O F F
F R A M E R A T E
2
Turn the JOG dial button to move the arrow
(cursor) to the desired item.
3
For the selected item, press the JOG dial button,
and set whether or not the item is to be displayed
on the viewfinder screen.
Turn the JOG dial button, select display (ON) or no
display (OFF) and press the JOG dial button to
enter the selection.
4
2
Repeat steps and
other items.
5
Press the MENU button to exit the menu
operations.
The setting menu is cleared, and the displays
showing the unit's current statuses appear at the
top and bottom of the viewfinder screen.
(continued)
lamp displays
lamp display on
: O N
: O F F
: O N
: O F F
: O N
: O F F
: O F F
: O F F
: O F F
: O N
3
to set ON or OFF for the
Setting item
GAIN (0 dB) Lamp display appears when the gain is
set to a value other than "0 dB."
GAIN (–3 dB) Lamp display appears when the gain is
set to a value other than "–3 dB."
SHUTTER Lamp display appears when the
SHUTTER switch is at ON.
WHITE PRESET Lamp display appears when "PRST"
applies to the channel in the white
balance memory.
EXTENDER Lamp display appears when the lens
extender is used.
FILTER Lamp display appears when the filter is
set to a value other than "3200 K."
BLACK STR Lamp display appears when the black
stretch is at ON.
DAY LIGHT Lamp display appears when the white
(FILM MENU) balance presetting is DAY LIGHT.
D5600K Lamp display appears when the white
(CAM MENU) balance presetting is 5600 K.
MATRIX Lamp display appears when the matrix is
at ON.
COLOR Lamp display appears when the color
CORRECTION correction is at ON.
FRAME RATE Lamp display appears when the frame
rate has been set to 11 fps or below.
Description of setting
43