Table of Contents
Advertisement
Film tone gamma function
The unit incorporates a total of three gamma curves—
two cine curves (for films/for videos) and the
conventional video gamma curve—and it enables the
curve that best suits the application at hand to be
selected.
Switching from the film mode to video mode or vice
versa can be accomplished using the CAM MENU
SEL item on the OPTION screen of FILM (CAM)
MAIN MENU 4.
Two gamma curves (for films/for videos) are available
in the film mode. They can be set by selecting the
CINE GAMMA SEL item on the GAMMA screen of
FILM MAIN MENU 1.
Video mode (VIDEO MENU)
The images are processed using the conventional
video gamma characteristics.
Switching the frame frequency
This unit allows the frame frequency to be switched to
60.00 Hz or 59.94 Hz to provide support in areas with
different video systems. The frame frequency can be
switched on the OPTION screen of FILM (CAM) MAIN
MENU 4.
1
Perform the menu operations (pages 86 to 88),
and open the OPTION screen.
n < O P T I O N >
E N G S E C U R I T Y
S H D , A B B S W C T R L : O N
A W B A R E A
A W B & A B B O F F S E T : O F F
C A M M E N U S E L
S Y S T E M F R E Q .
E V F S E L
S U P E R D T L
2
Turn the JOG dial button to move the arrow
(cursor) to the SYSTEM FREQ item.
60
: O F F
: 5 0 %
: F I L M M E N U
: 5 9 . 9 4 H z
: M O N O
: O F F
Film mode (FILM MENU)
Two types of film-like images can be achieved in this
mode.
FILM REC (for films: film gamma)
This is the optimum mode for printing the images
recorded on tape onto film and presenting them.
The images are processed using the film-use cine
gamma characteristics developed by Panasonic.
VIDEO REC (for videos: film tone gamma)
Even when playing back images recorded on tape
using a video component, this mode provides a
wide dynamic range, enabling images to be played
back in a mode where the images are more like film
images than the conventional video images.
The images are processed using the video-use cine
gamma characteristics developed by Panasonic.
The menu settings performed in the film mode and
video mode are saved separately.
3
Press the JOG dial button to set the item to be
used.
Turn it to select the frequency, and then press it to
enter the selection.
At this time, the
TURN O O FF P P OWER
flashes on the display.
4
Press the MENU button to exit the menu
operations.
The setting menu is cleared, and the displays
showing the unit's current statuses appear at the
top and bottom of the viewfinder screen.
5
Set the POWER switch to OFF to turn off the
power.
The frame frequency will be switched when it is
turned back on.
Press the MODE CHECK button to check that the
frame frequency has been switched.
message
Advertisement
Table of Contents
