Formatting The Sd Memory Card - Panasonic HDC27H Operating Instructions Manual

SD memory card operations
The operations for saving setting data on the SD
memory card and loading the saved data from the
card are performed on the CAM CARD READ/WRITE
screen of FILM (CAM) MAIN MENU 3.

Formatting the SD memory card

1
Perform the menu operations (pages 86 to 88),
and display the "CAM CARD READ/WRITE"
screen.
n < C A M C A R D R E A D / W R I T E >
S E L E C T
R E A D
S E L E C T
W R I T E
C A R D C O N F I G
T I T L E R E A D
R E A D U S E R D A T A
T I T L E :
1 :
2 :
3 :
4 :
2
Turn the JOG dial button to move the arrow
(cursor) to the CARD CONFIG item.
< C A M C A R D R E A D / W R I T E >
S E L E C T
R E A D
S E L E C T
W R I T E
n C A R D C O N F I G
T I T L E R E A D
R E A D U S E R D A T A
T I T L E :
1 :
2 :
3 :
4 :
3
When the JOG dial button is pressed, the following
message appears on the screen.
< C A M C A R D R E A D / W R I T E >
R E A D
S E L E C T
W R I T E
S E L E C T
C A R D C O N F I G
R E A D U S E R D A T A
T I T L E
C O N F I G ?
Y E S
n N O
(continued)
: 1
: 1
5 :
6 :
7 :
8 :
: 1
: 1
5 :
6 :
7 :
8 :
: 1
: 1
:
4
To proceed with the formatting of the SD memory
card, turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial button.
When the formatting of the card is completed, the
following message appears.
<Note>
When the card is formatted, the settings statuses
applying at the time are also saved in the memory.
< C A M C A R D R E A D / W R I T E >
R E A D
S E L E C T
W R I T E
S E L E C T
C A R D C O N F I G
R E A D U S E R D A T A
T I T L E
C O N F I G O K
If one of the following messages appears when the JOG dial
button is pressed, the card will not be formatted.
Error message
CONFIG NG
NO CARD
(SD memory card has not been
inserted)
CONFIG NG
ERROR
(the card cannot be formatted)
5
Press the MENU button to exit the menu
operations.
The setting menu is cleared, and the displays
showing the unit's current statuses appear at the
top and bottom of the viewfinder screen.
<Note>
Data titles cannot be recognized when the SD
memory card was inserted while the CAM CARD
READ/WRITE screen was open. Move the arrow
(cursor) to the TITLE READ item, and press the
JOG dial button.
The data title is recognized, and the title is
displayed.
: 1
: 1
:
Remedial action
Insert the card.
The card may be defective.
Replace it.
75