Table of Contents
Advertisement
Parts and their functions
Accessory mounting section
1 Hooks for attaching shoulder strap
Attach the ends of the accessory shoulder strap to
these hooks.
2 Light shoe
Use this to attach the video light, etc.
3 Lens mount (Bayonet type)
Use this to attach the lens.
4 Lever for securing lens
Insert the lens into the lens mount 3, and turn the
lens mount ring using this lever to secure the lens.
5 Lens mount cap
To remove the cap, push the lever for securing the
lens 4 up.
Keep the cap in place while the lens is not
attached.
6 Lens cable/microphone cable clamp
This clamp is for anchoring the lens cable or
microphone cable.
7 Tripod mount
Mount the tripod adapter (SHAN-TM700), available
as an optional accessory, when the unit is to be
anchored to the tripod.
8 LENS terminal (12-pin)
The connecting cable of the lens is connected here.
For details concerning the lenses that can be used,
consult your dealer.
10
(continued)
1
2 :
5
6
3
4
6
8
7
1
;
9
9 Shoulder pad
This pad can be adjusted to facilitate operation
when the unit is operated on the user's shoulder.
The pad position can be moved forward or
backward when the two securing screws are
loosened.
: Mounting hook for tape measure
The tape measure used to measure the subject
distance is attached here.
<Note>
This hook is not to be used for the shoulder strap.
; Focus mark
This indicates the focus position of the CCD unit.
Advertisement
Table of Contents
