Mounting The Unit On A Tripod - Panasonic HDC27H Operating Instructions Manual

Mounting the unit on a tripod

Use the tripod adapter available as an optional
accessory for mounting the unit onto a tripod.
1
Attach the tripod adapter to the tripod.
<Note>
Select the adapter holes that best support the
center of gravity of the unit and tripod adapter.
Check that the diameters of the selected holes
match the diameters of the pan head.
Tripod adapter
2
Attach the camera to the tripod adapter.
Slide the camera toward the front along the
grooves until it clicks into place.
Detaching the unit from the tripod adapter
While pressing the red lever, move the black lever in
the direction of the arrow, slide the unit toward the
rear, and detach it.
<Note>
If the pins in the tripod adapter fail to return to their
original positions after the camera has been
detached, press the red lever again and at the same
time move the black lever in the direction of the
arrow: this will return the pins to their original
Pan head
positions.
Bear in mind that the camera cannot be attached
while the pins are left in the center.
Tripod adapter
Black lever
Red lever
39