Menu Operations - Panasonic HDC27H Operating Instructions Manual

Menu operations

The setting menu operations are performed using the
MENU button and JOG dial button.
configuration is divided into the camera unit's setting
menus and VTR unit's setting menus.
It is possible to select the engineer menu which
enables all the setting menu items to be set or,
alternatively, the user menu which consists of
individually tailored menus so that only those menus
which will be used most frequently can be set.
User menu
The user menu was set when the unit was shipped.
However, the user can change the configuration of the
menus by selecting only those menus which will be
used most frequently so that they will be tailored to
the user's individual needs.
Set the user menu on the USER MENU SELECT 1, 2,
and 3 screen of the engineer menu. The data settings
are saved in the non-volatile memory for long-term
storage. The menu settings performed in the film
mode and video mode are saved separately.
Display method
O When the MENU button is pressed, the camera
unit's USER menu screen is displayed.
O When the MENU button is pressed again, the VTR
unit's USER menu screen is displayed.
O When the MENU button is pressed once more, the
menu screen display is cleared.
When the power is switched on
1 A B 0 d B
Press the MENU
button.
¢¢¢¢
F I L M U S E R M E N U
Press the MENU
button.
¢¢¢¢
V T R U S E R M E N U
Press the MENU button.
86
The menu
Status display
C Z 7 3
¢¢¢¢
Camera unit's user
menu
¢¢¢¢
VTR unit's user
menu
JOG dial button
Engineer menu
All the setting menu items can be set on this menu.
The data settings are saved in the non-volatile
memory for long-term storage.
Display method
O Hold down the MENU button for at least 3 seconds.
O When the MENU button is pressed again, the VTR
unit's MAIN MENU screen is displayed.
O When the MENU button is pressed once more, the
menu screen display is cleared.
<Note>
The engineer menu is displayed at all times when the
AJ-EC3 extension control unit (optional accessory) is
connected to the unit for operating the unit by remote
control.
Film mode and video mode
The unit can be set to the film mode or video mode on
the OPTION screen of FILM (CAM) MAIN MENU 4.
When VIDEO MENU is selected as the CAM MENU
SEL setting on the OPTION screen, the FILM USER
MENU and FILM MAIN MENU displays change to the
CAM USER MENU and CAM MAIN MENU.
The menu settings performed in the film mode and
video mode are saved separately.
MENU button