Table of Contents
Advertisement
Parts and their functions
Menu operation section
3
2
1 SD memory card insertion slot
An SD memory card (optional accessory) is
inserted here. This slot is used for writing/saving
menu data. (See page 74)
2 MENU button
When this is pressed, the camera unit's user menu
screen, which was set at the time of shipment,
appears.
When it is pressed again, the VTR unit's user menu
screen appears.
When it is pressed once more, the menu screen
display is cleared.
The selection of the menu for the user menu can be
changed on the USER MENU SELECT screen.
When the power is turned on
1 A
B
0 d B
Press the MENU
button.
¢¢¢¢
F I L M U S E R M E N U
Press the MENU
button.
¢¢¢¢
V T R U S E R M E N U
Press the MENU button.
20
(continued)
1
Status display
C Z 7 3
¢¢¢¢
Camera unit's user
menu
¢¢¢¢
VTR unit's user
menu
3 JOG dial button
When this dial button is turned while the menu
screen is displayed, the cursor is moved to each of
the setting items.
The menu items are set by operating this dial
button.
There are two types of menus, MAIN and SUB, and
each menu is displayed on a page-by-page basis.
The menu configuration can be changed to suit the
desired objective.
For details on the menu operation method, refer to
"Menu operations" on pages 86 to 88.
Time code related section (1)
1
3 2
1 GENLOCK IN connector (BNC)
Supply the analog HD reference signal to this
connector for gen-locking the camera unit or when
externally locking the time code.
<Note>
Input reference signals (1280 a 720, 59.94 Hz or
1280 a 720, 60 Hz) which have the same format as
the unit.
2 TC IN connector (BNC)
Supply the time code which will serve as the
reference to this connector when externally locking
the time code.
3 TC OUT connector (BNC)
To lock the time code of an external VTR to the
unit's time code, connect this connector to the time
code input (TC IN) connector on the external VTR.
To simultaneously output the user bits containing
the active frame information, refer to pages 16 and
68.
Advertisement
Table of Contents
