Table of Contents
Advertisement
Audio input preparation
When connecting a microphone to
the MIC IN jack
1
Connect the microphone's connecting cable to the
MIC IN jack on the camera.
MIC IN jack
2
Set the AUDIO IN switch or switches to "FRONT"
in accordance with the audio channel or channels
whose sound is to be recorded.
AUDIO IN switches
<Note>
When extending the microphone's connecting cable,
use a cable which supports the phantom power supply
system.
(continued)
When connecting a microphone to
the AUDIO IN connector
1
Connect the microphone's connecting cable to the
AUDIO IN connector on the camera.
Two microphones can be connected to the CH1
and CH2 connectors.
2
Set the AUDIO IN switch or switches for the
channel or channels to which the microphone or
microphones have been connected to "REAR."
<Note>
When the LINE/MIC/+48V selector switch is set to
"+48V," the phantom power supply system is
supported.
AUDIO IN
connectors
AUDIO IN switches
37
Advertisement
Table of Contents
