Hc12 Controlling A Sunfire Tgr-401 Receiver - Elan HC6 Installation Manual

Hide thumbs Also See for HC6:

Table of Contents

E L A N

Figure 2-5:HC12 / Receiver Connections

HC12 Controlling a Sunfire TGR-401 Receiver

The HC6/HC12 can be configured to control a number of 3

or IR commands. Figure 2-5 shows an HC12 controlling a Sunfire TGR-401 with serial

commands. The Internal Player is being used as a source. The component video out of

the TGR-401 is connected to the video input of the HC12 and the component video output

of the HC12 is connected to an input on the monitor. This allows source video, the

TGR-401's On Screen Display (OSD) and the HC12's OSD to be viewed on the monitor

without the need to switch inputs on the monitor. Comm port #1 of the HC12 is connected

to the RS-232 input of the TGR-401 using a DB9-RJ45 adapter.

In the ELAN configuration software, program the HC12 to control the TGR-401. See the

Integration Notes at www.elanhomesystems.com/dealer.

The TGR-401 manual covers additional connections for sources, speakers and other

devices.

HC6/HC12

INSTALLATION MANUAL

party A/V receivers using serial

Page 19

Table of Contents

Hc12