Port Forwarding - Elan HC6 Installation Manual

E L A N
Figure A-4: Port Forwarding
© ELAN 2010 | All rights reserved.

Port Forwarding

There are two ports on the wireless router that are forwarded to the System Controller in
standard installations. Both ports can be changed if needed.
Port 2198 - Remote Access: this port enables a remote user to access the Viewer interface
over the Internet. (On older systems, this was assigned to port 443.)
Port 2199 - Service: this port enables service connections, so that support personnel from
ELAN or from the dealer's office can access the System Controller remotely to troubleshoot
issues or change programming. (On older systems, this was assigned to port 5001.)
Figure A-4 shows the standard port forwarding settings. The "IP Address" should match
the System Controller's IP address.
.
HC6/HC12
INSTALLATION MANUAL
Page 57