Advanced Navigation Spatial FOG Dual ETH Reference Manual page 26

14.1 Network Settings
Using the Ethernet interface Network Settings page you can modify the network connection
properties such as swapping to a fixed IP address.
Illustration 5: Screenshot of Ethernet interface Network Settings page
Click OK when done.
WARNING: if using a fixed IP address you MUST remember the details you enter. If you
reset the Ethernet interface back to its factory default settings using the Apply Defaults
page, the IP Configuration settings you have set WILL NOT change.
Spatial FOG Dual ETH
Supplementary Reference Manual
Page 25 of 29
Version 1.2
10/09/2019