Connecting Power And Turning The Power On; Figure 9 Back Panel Power Switch - Nokia IP300 Series Installation Manual

Caution
Blocking ventilation openings during installation may result in
damage to the appliance.

Connecting Power and Turning the Power on

The power plug and power switch for the IP300 Series appliance is located on
the back of the appliance, as
Note
The IP300 Series appliance power supply automatically detects the input
voltage (115VAC/60Hz [90 to 132] or 220VAC/50Hz [180 to 264]) and
configures itself appropriately.

Figure 9 Back Panel Power Switch

To connect the power supply
1. Connect the power cord securely into the power socket on the back of the
appliance.
2. Plug the other end of the cord into a three-wire grounded power strip or
wall outlet.
3. Press the power switch to the "on" position to turn on power to the
appliance.
Nokia IP300 Series Security Platform Installation Guide
All manuals and user guides at all-guides.com
Connecting Power and Turning the Power on
Figure 9 shows.
00249
Power switch Power plug
25