Nokia IP300 Series Installation Manual page 73

3. Slide the chassis assembly forward to expose the DIMM sockets. Remove
the tray completely to avoid damaging components.
4. Remove any memory module necessary by pressing the two retaining
clips outward and carefully pulling each DIMM upward as the following
figure shows.
You might need to pull opposite ends of the DIMM alternately to
gradually free it from the contact pins.
5. The memory DIMMs are keyed to prevent improper insertion. Press the
new DIMM into the socket until it clicks into place.
Nokia IP300 Series Security Platform Installation Guide
All manuals and user guides at all-guides.com
Replacing or Upgrading Memory
00252a
00263
65