Configuring And Activating Interfaces; Monitoring Network Interface Cards - Nokia IP300 Series Installation Manual

11. Tighten the retaining screws that hold the chassis assembly.
The appliance automatically restarts when the chassis assembly clicks into
place.

Configuring and Activating Interfaces

The IP300 Series appliance automatically detects any new NIC when the
appliance is restarted. Use Network Voyager to configure and activate the
logical and physical interfaces on the NIC.
For information about how to access Network Voyager and the related
reference materials, see

Monitoring Network Interface Cards

You can asses the general operating condition of the NICs in your appliance
by looking at the LED status indicators on the NICs. The status indicators for
each NIC are explained in the NIC reference chapter.
For the status indicator information for the built-in Ethernet ports or the two-
port Ethernet NIC, see
Interface, PMC"
Use Network Voyager to access detailed port information. For information
about accessing Network Voyager, see
on page 30. You can also use the IPSO tcpdump command to examine the
track on a specific port.
Nokia IP300 Series Security Platform Installation Guide
All manuals and user guides at all-guides.com
Chassis assembly retaining screws
"To open Network Voyager"
"Four-Port and Two-Port 10/100 Mbps Ethernet
on page 46.
Configuring and Activating Interfaces
on page 30.
"Accessing Nokia Network Voyager"
43