Connectors And Cables; Figure 15 Two-Port V2 Gigabit Ethernet Nic, Copper - Nokia IP300 Series Installation Manual

5
Connecting PMC Network Interface Cards
Figure 15
Ethernet NIC you use in the Nokia IP300 Series appliance.

Figure 15 Two-Port V2 Gigabit Ethernet NIC, Copper

Connectors and Cables

The copper Gigabit Ethernet NIC receptacles are RJ45 connectors.
To connect to a 1 Gbps hub, switch, or router, use a straight-through RJ-45
cable (Category 5 type cable, or as required by your network configuration).
Note
Certain circumstances might require shielded Category 5 Ethernet cables
to meet Class B emissions requirements.
Note
All Nokia copper Gigabit Ethernet NICs support cable auto-sensing. You
can use a straight-through or crossover cable to connect the NIC to a
Gigabit Ethernet hub or switch, or to connect directly to a host.
In Figure
with the copper pins facing up and toward you.
50
All manuals and user guides at all-guides.com
shows the front panel details for the two-port V2 copper Gigabit
Ports
16, the RJ-45 cable output connector is numbered from right to left,
Nokia IP300 Series Security Platform Installation Guide
Link LEDs (green or yellow)
Activity LEDs (yellow)
LINK
ACT
LINK
ACT
00386.4