Table of Contents
Advertisement
2. Connect the other end of the cable to the VT100 console or to a system
Connecting Power and Turning the Power On
A power switch and a receptacle for the power cord are located on each power
supply on the back of the appliance as shown in
Figure 8 Power Switch Location
To connect the power supply
1. Connect the power cord securely into the power cord receptacle on the
2. Plug the other end of the power cord into a grounded power strip or wall
3. Toggle the power switch to the on position to provide power to the
Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
For cable pin assignments for the console connection, see
page 24.
running a terminal-emulation program.
power supply.
outlet.
EM5400 appliance.
Connecting Power and Turning the Power On
Figure
8.
Power cord receptacle
Figure 4
on
00321
Power switch
39
Advertisement
Table of Contents
