Battery Installation/Battery Charge - Panasonic KX-TG2730S Operating Instructions Manual

Battery Installation/Battery Charge

I Battery installation
1 Install the battery in the handset.
2 Close the handset cover.
I Battery charge
To power the handset, charge the battery.
Place the handset on the base unit for about 15 hours before initial use.
I Recharge
Recharge the battery when:
–"Recharge battery" is displayed,
–" " flashes on the display, or
– the handset beeps every minute while it is in use.
• Clean the handset and the base unit charge contacts with a soft, dry
cloth once a month. Clean more often if the unit is subject to grease,
dust or high humidity. If not, the battery may not charge properly.
• If the battery is fully charged, you do not have to place the handset on the
base unit until "Recharge battery" is displayed and/or "
This will maximize the battery life.
• The battery cannot be overcharged.
A nickel cadmium battery that is recyclable powers the product
you have purchased. At the end of its useful life, under various
state and local laws, it is illegal to dispose of this battery into
your municipal waste stream. Please call
1-800-8-BATTERY for information on how to recycle this
battery.
–6–
" flashes.