Table of Contents
Advertisement
Matrix: Version 01.36 T.
Merger: Version 01.06 F/E
Device 01: Version 01.44
RESET FRAMES
4.
Use DEV- and DEV+ to view device settings in sequence.
5.
Press HOME to leave the menu and to return to the home menu.
Firmware Update
The processor has a feature to update dimmers and the Ethernet merger with
firmware.
CAUTION: This is only to be attempted by an IES technician or under specific instruction from
IES. Incorrect or inappropriate firmware upgrades could result in the loss of communication.
To update firmware
1.
Select INSTALL from the home menu.
2.
Press DOWN or UP or use the rotary encoder to choose FIRMWARE UPDATE
menu. Press SELECT.
3.
The display shows:
FIRMWARE UPDATE
UPDATE?
[NO]
4.
Use the rotary encoder to choose from:
NO (no action)
ALL DIMMERS
SELECT DIMMER
MERGER
5.
Press HOME to leave the menu.
Miscellaneous
Sleep mode
In some venues, the dimmers remain on constantly with the lighting system being
switched activated by the control desk only. In order to provide an energy saving
regime which switches the dimmers into a lower power mode, the SLEEP function
has been included. When enabled, the sleep function will turn off all non-essential
8803uS
39045/
0
F/E
0/
1654
DEV-
DEV+
HOME
HOME
33
Advertisement
Table of Contents
