To Set Up The Merger Gateway Address; To Set Up The Merger Universes - ETC MATRIX MK. II User Manual

5. Use the rotary encoder to choose the address number and press >>>> or <<<<
to tab other 3-digit groups.
6. Press ENTER to leave the menu, then either SAVE (to record the changes) or
CANCEL (to leave the previous settings unchanged).
To set-up the merger gateway address:
1. Select INSTALL from the home menu
2. Press DOWN or UP or use the rotary encoder to choose MERGER ETHERNET
SETUP menu. Press SELECT.
3. This accesses the Merger's Ethernet menu tree. Press DOWN or UP or use the
rotary encoder to choose GATEWAY ADDRESS menu. Press SELECT.
4. The screen shows:
SELECT MERGER ETHERNET GATEWAY ADDRESS
IP ADDRESS
<<<<<
7. Use the rotary encoder to choose the address number and press >>>> or <<<<
to tab other 3-digit groups.
8. Press ENTER to leave the menu, then either SAVE (to record the changes) or
CANCEL (to leave the previous settings unchanged).
To set-up the merger universes:
This option is used to set which Streaming ACN Universe numbers the rack listens to (for
UA and UB inputs to the modules). Streaming ACN universe numbers are specified
between 1 and 67898.
1. Select INSTALL from the home menu
2. Press DOWN or UP or use the rotary encoder to choose MERGER ETHERNET
SETUP menu. Press SELECT.
3. This accesses the Merger's Ethernet menu tree. Press DOWN or UP or use the
rotary encoder to choose NET, UNIVERSE A menu. Press SELECT.
4. The screen shows:
MERGER LOGIC NET, UNIVERSE A
5. Press EDIT and use the rotary encoder to choose the required logical net and
universe.
6. Press ENTER to leave the menu, then either SAVE (to record the changes) or
CANCEL (to leave the previous settings unchanged).
7. Repeat for Universe B.
AAA BBB CCC
[010] 001 001
>>>>>> EDIT CANCEL SAVE
sACN UNIVERSE
0 000
EDIT CANCEL
DDD
001
SAVE
19