Table of Contents
Advertisement
<<<<<
5.
Use the rotary encoder to choose the address number and press >>>> or <<<<
to tab other 3-digit groups.
6.
Press ENTER to leave the menu, then either SAVE (to record the changes) or
CANCEL (to leave the previous settings unchanged).
To set-up the Ethernet subnet mask for DimStat communications:
1.
Select INSTALL from the home menu
2.
Press DOWN or UP or use the rotary encoder to choose ETHERNET SETUP
menu. Press SELECT.
3.
This accesses the Ethernet menu tree. Press DOWN or UP or use the rotary
encoder to choose SUBNET MASK menu. Press SELECT.
4.
The screen shows:
SELECT ETHERNET SUBNET MASK
SUBNET MASK
<<<<<
5.
Use the rotary encoder to choose the address number and press >>>> or <<<<
to tab other 3-digit groups.
6.
Press ENTER to leave the menu, then either SAVE (to record the changes) or
CANCEL (to leave the previous settings unchanged).
To set-up the Ethernet gateway address for DimStat communications:
1.
Select INSTALL from the home menu
2.
Press DOWN or UP or use the rotary encoder to choose ETHERNET SETUP
menu. Press SELECT.
3.
This accesses the Ethernet menu tree. Press DOWN or UP or use the rotary
encoder to choose GATEWAY ADDRESS menu. Press SELECT.
4.
The screen shows:
>>>>>>
EDIT
CANCEL SAVE
AAA
BBB
CCC
[255]
255
255
>>>>>>
EDIT
CANCEL SAVE
DDD
000
17
Advertisement
Table of Contents
