To Set Up The Merger Subnet Mask - ETC MATRIX MK. II User Manual

SELECT MERGER ETHERNET GATEWAY ADDRESS
IP ADDRESS
5. Use the rotary encoder to choose the address number and press >>>> or <<<<
to tab other 3-digit groups.
6. Press ENTER to leave the menu, then either SAVE (to record the changes) or
CANCEL (to leave the previous settings unchanged).
To set-up the merger Ethernet IP address:
1. Select INSTALL from the home menu
2. Press DOWN or UP or use the rotary encoder to choose MERGER ETHERNET
MENU. Press SELECT.
3. This accesses the Merger's Ethernet menu tree. Press DOWN or UP or use the
rotary encoder to choose IP ADDRESS menu. Press SELECT.
4. The screen shows:
SELECT MERGER ETHERNET ADDRESS
IP ADDRESS
5. Use the rotary encoder to choose the address number and press >>>> or <<<<
to tab other 3-digit groups.
6. Press ENTER to leave the menu, then either SAVE (to record the changes) or
CANCEL (to leave the previous settings unchanged).
To set-up the merger subnet mask:
1. Select INSTALL from the home menu
2. Press DOWN or UP or use the rotary encoder to choose MERGER ETHERNET
SETUP menu. Press SELECT.
3. This accesses the Merger's Ethernet menu tree. Press DOWN or UP or use the
rotary encoder to choose SUBNET MASK menu. Press SELECT.
4. The screen shows:
SELECT MERGER ETHERNET SUBNET MASK
SUBNET MASK
18
AAA BBB
[010] 001
<<<<< >>>>>> EDIT
AAA BBB
[010] 001
<<<<< >>>>>> EDIT
AAA BBB
[255] 255
<<<<< >>>>>> EDIT
CCC DDD
001 001
CANCEL SAVE
CCC DDD
002 002
CANCEL SAVE
CCC DDD
255 000
CANCEL SAVE