Teladoc Health Lite V2 Quick Reference Manual

Teladoc Health™ Lite
Operating the Lite V2
Dual Camera System
Display
When the someone is logged in,
their user name is displayed.
Otherwise, a screensaver will be
shown on the screen.
To turn on the Lite, press
once. The display will power up in 1-2
minutes.
To turn off the Lite, press
and follow on-screen directions.
MUTE
Button
Mutes audio
from the Lite.
Volume Control
Check Button
Selects highlighted item when using on-screen tools.
Moving the Lite V2
The Lite is designed to be moved by hospital staff into a broad
array of locations ranging from clinics, emergency rooms, rural
hospitals, long-term care communities, and more.
•
Ensure Lite is set at its lowest position.
•
Ensure any auxiliary devices attached to Lite are unplugged.
•
Ensure the power cord is unplugged.
•
Ensure the wheels are unlocked before moving.
•
Exercise caution when encountering thresholds.
•
Move it to the desired location.
•
Lock the wheels.
•
Plug in the power cord.
The requirement for operation is a standard grounded AC outlet
supplying a minimum of 120 VAC, 60 Hz, 5.1 A (US) or 230 VAC, 50
Hz, 2.7A (International).
A battery charge can last 7 hours on a full charge (depending on
usage).
POWER
POWER
Pause Video Button
Blocks video from the Lite.
V2 Quick Reference Guide
®
Arrow Buttons
Used to navigate
on-screen tools.
Device Network Checkup
The Network Checkup screen runs and displays the
results of a test of the device's current network
connection.
Tap Settings
Network Checkup.
Lite V2
Height
adjustment
handle
Lock/unlock
wheels
CAUTION: Lite should be
powered on and charging
whenever it is not in use.
Directional Microphone
Speakers
Button Panel
DISCONNECT
Press
active session following a
disconnect confirmation prompt.
Menu Button
Used to access on-screen
tools.
> Network Checkup
Push with
handle
24/7 Technical Support (877) 484-9119
P/N: MA-13360-009—©2021 Teladoc Health
to end an
to run the