Advertisement
1. Introduction
Congratulations on the purchase of a sautershop MFS-3202 template. This product
enables you to produce absolutely precise hole lines in the System 32 format in the
simplest and quickest way, to set pilot holes for drawer extensions and to drill dowel
connections.
Especially in furniture construction, all parts can be developed using the System 32
template. You can make the required holes in seconds.
2. Preparations:
First prepare a flat work surface with sufficient space (depending on the
-
size of the workpiece). Ideally, a workbench should be provided where
the workpieces can be clamped horizontally as well as vertically.
Required accessories:
- hand-guided router fitted with 17mm copy ring
-
- at least 2 screw clamps, one-hand clamps or similar clamping
-
tools
- Drill or router bit with the required diameter
-
3. Application examples:
The sautershop MFS-3202 milling template is useful in a variety of applications.
These include:
- Hole lines for shelves
- Extension of existing hole lines
- Holes for hinges / door fittings
- Cross hole rows for drawer runners
- Dowel holes up to 14mm diameter
- Parallel hole rows
- etc.
Advertisement
