Advertisement
Multi-milling template MFS-3202
The MFS-3202 Multi-milling template makes it easy to produce absolutely precise
holes for a wide range of applications. For this purpose, the templates are
manufactured with the help of modern CNC machines with an absolutely precise fit.
Due to material and tool-related dimensional changes, it can happen that especially
the smaller 5mm bolts are somewhat difficult to insert into the hole.
What to do if a bolt does not fit?
In this case it is no problem to carefully sink the bolt with a hammer, with light blows.
The bolt should already be inserted as far as possible into the hole.
1
.
Bolzen mit einer (Spitz-) Zange
heraus drücken
3.
Extra Product information
for the use of
.
2
.
1. Insert bolts as far as possible
2. Sink with light hammer blows
3. Bolt sits flush a
4. Press the bolt out vertically
from behind to remove it.
Advertisement
