Midea WHK 7.62 BL User Manual page 27

LIGHTING
LIGHT REPLACEMENT 1.5W LED light.
•
Switch off the extractor hood and isolate the extractor hood by pulling out the mains
plug or switching off the fuse.
•
Remove the grease filter.
•
Remove the light by levering its fitting from the hood body.
(this may require pressure or force to be applied).
•
Disconnect the connector of the light.
•
Replace the light with a new one of the same type, making sure that you connect the
light with the light cable correctly.
•
Reinstall the light back to the hood body.
Diameter Max Power
70mm 1.5W
DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances
must not be disposed of in the normal unsorted municipal waste stream.
Old appliances must be collected separately to optimize the recovery
and recycling of the materials they contain and reduce the impact on
human health and the environment. The crossed out "wheeled bin"
symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected. Consumers
should contact their local authority or retailer for information concerning
the correct disposal of their old appliance.
Voltage Picture
DC 12 V
10
Lamp Cap ILCOS D code
—— DSR-1.5-S-70
DE
EN