Table of Contents
Advertisement
ABOUT (DEVICE INFO)
This function is used to display device-related information (firmware version, model,
permissible load, serial number). To enter the ABOUT menu screen, first call up the
main menu screen, then position the cursor on the ABOUT function using the UP or
DOWN arrow keys, and then press ENTER. The display shows the About menu
screen. To return to the main menu screen, press the ESC key.
ABOUT
FIRMWARE REV. : 3.0
MODEL:
DA
CAPACITY:
10 N.m
S/N:
05130001
6.5 Measurement methods
In order to achieve higher accuracy of measurements, the torque ratio must
correspond to the value specified for the respective device. The bending and torque
loads acting on the load cell must be reduced, as they can affect the measurement
result.
The permissible load according to the specifications on the front of the device must not
be exceeded under any circumstances. Otherwise the load cell will be permanently
damaged, even in the event of a short-term overload. Such damage is excluded from
the warranty.
14
DA-BA-e-2020
Advertisement
Table of Contents
