Page 1
Procedures for which you do not have the ne- cessary tools, instruments and skills should be performed by a trained technician. Reproduction or other use of this Manual, without the express written consent of Fri-Jado, is prohibited. WWW.FRIJADO.COM Installation Manual Hot Deli 3/4/5/7 form 9123544 rev. 07/2015...
Page 2
EMPTY PAGE Installation Manual Hot Deli 3/4/5/7 form 9123544 rev. 07/2015 Page 2...
Page 3
Versions Version Issue date Remarks dd/mm/yy 07/2015 01/07/2015 Square models added. Page 3 Installation Manual Hot Deli 3/4/5/7 form 9123544 rev. 07/2015...
INDEX Index ................................4 General technical data ..........................5 Technical data ............................5 Installation procedures ..........................6 Electrical supply ............................. 8 Legs/castors ............................8 Test run ..............................8 Instructions for operators ........................9 Placing and connecting ........................... 10 Hot Deli 3 Premium/Essential ......................10 Hot Deli 3 self service ..........................
• Self-Serve = Self service. All of the information, illustrations and specifications contained in this manual are based on the latest product information available at the time of printing. TECHNICAL DATA Type HD 3 HD 4 HD 5 HD 7 Power (W) Premium...
INSTALLATION INSTALLATION PROCEDURES • Unpacking of the unit. • Remove the pallet under the unit with the help of a fork lift. • Put the unit on his location. • Unpack and install all separately packed parts. • Remove all vinyl protection. •...
Page 7
INSTALLATION SEPARATELY PACKED PARTS Clean and place all parts and/or accessories. Follow steps 1 to 4 to place the pan frame and follow steps 5 to 7 to place the side glass and sliding doors. Caution: Handle glass panels with care to avoid breakage. The side glass panels are tempered safety glass.
INSTALLATION ELECTRICAL SUPPLY Prior to installation, test the electrical service to assure that it agrees with the specifications on the machine data plate located on the middle backside panel near the controls. The con- necting cable for the unit must be equipped with an approved plug connection. If use is to be made of a permanent connection, the connecting cable must be connected to a manual on/off switch that is installed near the unit in a clear visible way.
INSTALLATION INSTRUCTIONS FOR OPERATORS After installation of the Merchandiser, the operator of the unit has to be instructed. The instruction has to cover the following subjects: • Programming and options. • Working of the unit. • Free space of unit for servicing and for proper operation. •...
PLACING PLACING AND CONNECTING Description belonging to the lables on the drawings Label Description Power cable, length 2,5 meters * Hose pillar 1/2” - 90° - 3/4” gland ** *) length is measured from the point where the cables comes out of the unit **) only for models with automatic water filling HOT DELI 3 PREMIUM/ESSENTIAL Page 10...
Need help?
Do you have a question about the HD 3 and is the answer not in the manual?
Questions and answers