SKF Lincoln 274874 Installation And Maintenance Manual
SKF Lincoln 274874 Installation And Maintenance Manual

SKF Lincoln 274874 Installation And Maintenance Manual

Hose reel pump

Advertisement

Quick Links

Hose reel pump assembly
Models 274874 and 276360
01
Version
Date of issue
September 2012
Form number
404468
Section
A21
Page
8C
Installation and maintenance guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Lincoln 274874 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SKF Lincoln 274874

  • Page 1 Installation and maintenance guide Hose reel pump assembly Models 274874 and 276360 Version Date of issue September 2012 Form number 404468 Section Page...
  • Page 2: Safety Instructions

    Table of Contents Safety instructions W a r n i n g This equipment generates very high grease Do not exceed maimum rated outlet Safety . . . . . . . . . . . . . . . . . . . . . . . . . pressure .
  • Page 3: Appropriate Use

    Appropriate use Pump installation 1 Mount the hose reel and pump in the desired location . The reel and flow kit is intended for use in 2 Connect the pump outlet from the mani- Notice mobile applications where there are grease fold to the hose reel inlet using the sup- A separate fuse should be wired points that require the use of a grease fitting...
  • Page 4: Maintenance And Repair

    Pressure switch Maintenance and 12 Using a small rod or stiff wire .093 in . adjustment procedure (2,4 mm) or smaller, push the spool repair assembly (7) up from the bottom to The pressure switch is factory set at remove it from the larger opening in the Pressure switch 5,800 psi (400 bar) .
  • Page 5: Inspection And Repair

    Inspection and repair Reassembly Pump 1 Place backup washer (5) and cup seal (4) Inspect the steel plunger (7) to ensure there in the body (6) . Be sure parts are seated Please refer to the FlowMaster pump ser- are no gouges or scratches that would pre- against the bottom of the bore .
  • Page 6 Fig. 1 274630 Pressure switch...
  • Page 7 Fig. 2 Indicates change...
  • Page 8 Fig. 3 Bucket cover assembly 274878 Exploded view Parts not shown: 33152 Pump mounting gasket, 1 required 50169 1/4-20 x 3/4 in . hex bold, 4 required .
  • Page 9: Kits And Accessories

    Kits and Accessories The hose reel pump assembly 274773 is intended to be used in kits that include all parts necessary to mount and dispense grease to grease points that are not serviced by an automated lubrication system . The table below lists the kits and accessories available .
  • Page 10 Repair parts for pump and pressure switch Item no . Qty . Description Part no . Adaptor 274620 O-ring (included with item 1) Retainer 274613 Seal 274617 Backup washer 274616 Pressure switch body 274621 Spool assembly 274614 O-ring 274619 Spool stop 274618 Thread seal 274841...
  • Page 11: Lincoln Industrial Standard Warranty

    Lincoln industrial Special limited 5 year warranty- This warranty gives you specific legal limited oil meters, limited fluid control standard warranty rights . You may also have other rights that valves, aod (air-operated diaphragm vary by jurisdiction . pumps) Customers not located in the Western Standard limited warranty Lincoln warrants the 712 series control Hemisphere or East Asia: Please contact...
  • Page 12 SKF brings innovative solutions to OEMs and production facilities in every major industry world- wide. These five competence areas include bearings and units, seals, lubrication systems, mechatronics (combining mechanics and electronics into intelligent systems), and a wide range of services, from 3-D...

This manual is also suitable for:

Lincoln 276360

Table of Contents